输送带：是拽引和承载物料主构件，选用时根据张力大小采用棉帆布、聚酯帆布或尼龙帆布带。输送机其它部件设计满足各种带强要求，输送带联接根据不同工况条件可采用机械接头，冷胶接头，硫化接头，选用灵活。

Conveyer belt: it is the main component of pulling and bearing material, and using cotton canvas, polyester canvas or nylon canvas belt according to the tension size. The design of other parts of conveyor can meet all kinds of strong requirements. The conveyor belt connection can adopt mechanical joints, cold glue joints and vulcanized joints according to different working conditions.

输送带接头方法：

Conveyer belt joint method:

所有的输送带必须接成环形才能使用，所以输送带接头的好坏直接影响输送带的使用寿命和输送线能否平稳顺畅地运行。 一般输送带接头常用方法有机械接头、冷粘接接头、热硫化接头等。

All the conveyor belts must be connected to the ring to be used. Therefore, the quality of the conveyor belt directly affects the service life of the conveyor belt and whether the transmission line can run smoothly and smoothly. The common methods of general belt joints include mechanical joints, cold adhesive joints, hot vulcanization joints, etc.