| 运送带跑偏是带式运送机的最常见毛病 |
| 添加时间：2021/8/6 14:33:40 浏览次数： |
First of all, in operation, we should pay attention to the sticking material on the idler, which causes the rolling inflexibility. Together, we should pay attention to the smoothness of the conveyor belt. 其次要留意运送带跑偏问题，运送带跑偏是运送带运用中最常见的问题。在运用中不该超负荷运用运送带，发现运送带有损坏时一定要及时的进行修补。 Secondly, we should pay attention to the deviation of the conveyor belt. The deviation of the conveyor belt is the most common problem in the use of the conveyor belt. In operation, the conveyor belt should not be overloaded. When damage is found in the conveyor belt, it must be repaired in time. 在运用耐热运送带时要求张紧行程较长，当行程不够框格护坡模具 箱体护坡模具 华尔街铜牛 电阻柜 接地电阻柜 电缆保护接地箱 隔离墩模具 化粪池模具时也可从头硫化或加大张紧行程来解决。运送带跑偏是带式运送机的最常见毛病，对其及时精确的处理是其安全安稳运行的保证。跑偏的现象和原因许多，要根据不同的跑偏现象和原因采纳不同的调整办法，才干有效地解决问题。 When using heat-resistant conveyor belts, long stretching travel is required. When the travel is insufficient, it can also be cured from scratch or increased stretching travel to solve the problem. Belt deviation is the most common fault of belt conveyor, and its timely and accurate treatment is the guarantee of its safe and stable operation. There are many phenomena and causes of deviation. We should adopt different adjustment methods according to different phenomena and causes of deviation so as to solve the problem effectively. |
| 上一页 环形输送带是指平型输送带生产完成后 |
| 下一页 耐高温输送带这类输送带主要用于冶金、建材、铸造、焦化、化工等行业 |
Copyright © 技术支持：遨游网络