| 输送带接头的方法 |
| 添加时间：2019/10/11 15:39:09 浏览次数： |
| 接头的方法 Joint method 输送带接头的方法有：机械接头、冷粘接接头、热硫化接头等几个常用的方法。 The methods of conveyor belt joints include mechanical joints, cold bonded joints, hot vulcanized joints and so on. 机械接头 一般是指使用皮带扣接头，这种接头方法方便快捷，也比较经济，但是接头的效率低，容易损坏，对输送带产品的使用寿命有一定影响。在PVC和PVG整芯阻燃抗静电输送带接头中，一般8级带以下的产品都采用这种接头方法。 Mechanical joint generally refers to the use of belt buckle joint, which is convenient, fast and economical, but the efficiency of the joint is low and easy to damage, which has a certain impact on the service life of conveyor belt products. In the joints of PVC and PVG whole core flame retardant and antistatic conveyor belts, the joint method is generally used for products below grade 8 belt. 冷粘接接头 也就是采用冷粘粘合剂来进行接头。这种接头办法比机械接头的效率高，也比较经济，应该能够有比较好的接头效果，但是从实践来看，由于工艺条件比较难得掌握，另外粘合剂的质量对接头的影响非常大，所以不是很稳定。 Cold bonded joints are joints made of cold bonded adhesives. This kind of joint method is more efficient and economical than mechanical joint. It should have better joint effect. But in practice, it is not very stable because the process conditions are difficult to master and the quality of adhesives has a great influence on the joint. 热硫化接头 实践证明是最理想的一种接头方法，能够保证高的接头效率，同时也非常稳定，接头寿命也很长，容易容易掌握。但是存在工艺麻烦、费用高、接头操作时间长等缺点。 The practice of hot vulcanized joint proves to be the most ideal joint method, which can ensure high joint efficiency, stability, long service life and easy to grasp. However, there are some shortcomings, such as troublesome process, high cost and long operation time of joints. |
| 上一页 钢丝输送带的常见的驱动模式是由链条驱动的 |
| 下一页 确保输送带的成槽性和抗冲击性 |
Copyright © 技术支持：遨游网络