| 钢丝输送带的常见的驱动模式是由链条驱动的 |
| 添加时间：2019/10/23 16:07:39 浏览次数： |
| 钢丝输送带具有传动平稳、传动力矩小等应用优势，其中我们需要特别注意到的是当用钢丝输送带在输送蔬菜、食品、以及其它承载力低的产品的时候，我们可以考虑网带网状密度，另外如果是重型承载就需要加钢丝输送带的编织密度以及输送边缘。 Wire conveyor belt has the advantages of stable transmission, small transmission torque and other applications, among which we need to pay special attention to when using wire conveyor belt to transport vegetables, food and other products with low bearing capacity, we can consider the mesh density of the mesh belt, in addition, if it is heavy-duty bearing, we need to add the woven density of the wire conveyor belt and the conveying edge. 一般情况下，钢丝输送带的常见的驱动模式是由链条驱动的，其中它一般都由链条带动小轴再带动不锈钢网带运行的。还有一点我们需要了解的就是，它之所以会具有平稳和传动力矩小的优势，主要是因为钢丝输送带都采用轧牙串条、左右网条二根串，并大小网条连接而成的，并且它的大网条内穿进小轴，小轴二端穿入链条孔，从而达到链条驱动输送钢丝输送带的输送模式。 In general, the common driving mode of steel belt is driven by chain, in which the chain drives the small shaft and then the stainless steel mesh belt. What we need to know is that it has the advantages of stability and small power transmission moment, mainly because the steel wire conveyor belt is made of two strings of rolled teeth, left and right mesh bars, and connected by large and small mesh bars, and its large mesh bar passes through the small shaft, and the small shaft passes through the chain hole at the two ends, so as to achieve the transmission mode of chain driven steel wire conveyor belt. |
| 上一页 金属输送带常用的有201、304、316三种不锈钢材质 |
| 下一页 输送带接头的方法 |
Copyright © 技术支持：遨游网络